nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Tail Lamp > < To VIN # 350000|Page 12728
Page 2
background image

INTERIOR LAMP TIMER OPERATION

When interior lamp switch is in the "DOOR" position, the smart entrance control unit keeps the interior lamp illuminated for about 

30 seconds when:

-

unlock signal is supplied from driver's door unlock sensor while all doors are closed and key is removed from ignition key cylinder

-

key is removed from ignition key cylinder while all doors are closed

-

driver's door is opened and then closed while key is removed from the ignition key cylinder. (However, if the driver's door is closed with the key
inserted in the ignition key cylinder after the driver's door is opened with the key removed, the timer is operated.)

When the interior lamp switch is in the "DOOR" position and the unlock signal is supplied from the multi-remote controller while the driver's door is
locked and all doors are closed (even if key is inserted), the smart entrance control unit keeps the interior lamp illuminated for about 

30 seconds.

The timer is canceled when:

-

driver's door is locked,

-

driver's door is opened, or

-

ignition switch is turned 

ON.

ON-OFF CONTROL

When the driver side door, front passenger door, rear LH or RH door is opened, the interior room lamp turns on while the interior room lamp switch is in
the "DOOR" position.

BATTERY SAVER

The lamp turns off automatically when interior lamp, luggage room lamp, spot lamp and/or vanity mirror illumination is illuminated with the ignition key
is in OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in 

ON position for more than 10 minutes.

After lamps turn oft by the battery saver system, the lamps illuminate again when:

-

driver's door is locked or unlocked,

-

door is opened or closed,

-

key is inserted in ignition key cylinder

Tail Lamp > < To VIN # 350000|Page 12728