nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

O2 Sensor/PROM - MIL ON/DTC's Set|Page 983 > < Oxygen Sensor - Thread Cleaning and Other Precautions|Page 977
Page 1
background image

Oxygen Sensor: Customer Interest
O2 Sensor/PROM - MIL ON/DTC's Set

Classification: EC01-016A

Reference: NTB01-048A

Date: March 13, 2002

1999-00 PATHFINDER; MIL 'ON' WITH REAR OXYGEN SENSOR DTC P0138-P0140 OR P0158-P0160 STORED

ATTENTION: THIS BULLETIN HAS BEEN AMENDED.

This amended version of NTB01-04B revises "Chart A", and the Parts Information section. Please refer to this bulletin (NTB01-048A) and discard
previously distributed paper copies of NTB01-048.

APPLIED VEHICLE: 
1999-00 Pathfinder (R50)

APPLIED VIN: 
1999 MY vehicles; last six digits of VIN 350001 and higher (see NOTE in step 2)

2000 MY vehicles: all VINs

SERVICE INFORMATION

If an applied vehicle has a MIL "On" with any of the following DTCs stored in the ECM;

^

P0138 (Bank 1) H02S2 (Rear) (Max Voltage Monitoring)

^

P0139 (Bank 1) H02S2 (Rear) (Response Monitoring)

^

P0140 (Bank 1) H02S2 (Rear) (High Voltage)

^

P0158 (Bank 2) H02S2 (Rear) (Max Voltage Monitoring)

^

P0159 (Bank 2) H02S2 (Rear) (Response Monitoring)

^

P0160 (Bank 2) H02S2 (Rear) (High Voltage)

There are two repair actions that may be required to resolve this incident;

1.

Replace the incident bank(s) rear oxygen sensor(s) as indicated by the DTC on the CONSULT-II self-diagnosis printout to correct the condition.

2.

Reprogram the vehicle's ECM to the New ECM Data P/N.

O2 Sensor/PROM - MIL ON/DTC's Set|Page 983 > < Oxygen Sensor - Thread Cleaning and Other Precautions|Page 977