Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
/Page-1669003.png)
-
Make sure O-rings and oil seal are properly installed.
-
Always install new O-rings and oil seal.
-
Be careful of oil seal direction.
-
Cam ring, rotor and vanes must be replaced as a set if necessary.
-
Coat each part with ATF when assembling.
-
Pay attention to rotor direction.
-
When assembling vanes to rotor, rounded surfaces of vanes must face cam ring side.
-
Insert pin No. (2) into pin groove No. (1) of front housing and front side plate. Then install cam ring No. (3) as shown.
