Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
20. Install snap ring in the groove correctly. When the snap ring is installed correctly, about 2 mm (0.08 inch) gap exists at the snap ring ends.
CAUTION: Do not spread snap ring end gap more than 7 mm (0.28 inch) or else the snap ring will fatigue.
21. Apply ONE-LUBER SG No. 2 grease to input and output seal lips. Install oil seals with drift.
CAUTION: Be careful seal lip does not contact input shaft splines. Pay attention to oil seal direction. Spring side faces inward.
22. Pack input and output shaft gears with 40 - 45 grams (1.41 - 1.59 ounce) of ONE-LUBER SG No. 00 grease.