Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
a. Use a wire paper clip to push out parallel pins.
b. Remove parallel pins while pressing their corresponding plugs and sleeves.
-
Remove plug slowly to prevent internal parts from jumping out.
c. Place mating surface of valve facedown, and remove internal parts.
-
If a valve is hard to remove, place valve body facedown and lightly tap it with a soft hammer.
-
Be careful not to drop or damage valves and sleeves.
2. Remove valves at retainer plates.
a. Pry out retainer plate with wire paper clip.