Pathfinder LE 2WD V6-3.5L (VQ35) (2001)
15.
Remove the ECM Reprogramming card from slot A of CONSULT-II and install the Diagnostics (blue) card into slot A (see Figure 15).
CAUTION:
Do not use slot B.
16.
Turn "ON" the ignition switch (do not start the engine). CONSULT-II will turn on automatically (see Figure 16).
17.
Press "START" and select "ENGINE".
18.
Press "SELF-DIAG RESULTS" and confirm that no DTCs exist.
^
If no DTCs exist, proceed to step 19.
^
If DTCs exist, print them, then erase the DTCs and proceed to step 19.
NOTE:
Additional repairs may be necessary if the DTC's are not associated with a Reprogramming bulletin. Refer to the appropriate Service Manual.
19.
Press "Back" three times to return to the CONSULT-II main menu.
Confirm the vehicle and CONSULT II battery voltage.
20.
Press "SUB MODE" and select "BATTERY CHARGE".