nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Fuel Injector - MIL ON/Rough Idle/Hesitation/DTC's Set|Page 7542 > < Fuel Injector - MIL ON/Rough Idle/Hesitation/DTC's Set|Page 7540
Page 7
background image

12.

Disconnect the vehicle's fuel supply hose from the fuel rail. Block off the end of this hose with the combination fuel supply line plug PN 08555-4.
See Figures 3 and 4. For the 1999-01 Quest, refer to Figure 5.

NOTES:

^

Use the provided hose clamp to secure the combination fuel supply line plug in the end of the fuel supply hose for vehicles with "Hose Clamp
Type Connections".

^

Use the provided nuts/bolts to secure the combination fuel supply line plug on the end of the fuel supply hose fitting for vehicles with "Flange
Type Connections".

CAUTION: 

Plugging the vehicle's fuel supply hose is important to prevent fuel from siphoning out of the fuel tank during cleaning.

Fuel Injector - MIL ON/Rough Idle/Hesitation/DTC's Set|Page 7542 > < Fuel Injector - MIL ON/Rough Idle/Hesitation/DTC's Set|Page 7540