Pathfinder LE 4WD V6-3.3L (VG33E) (1997)
/Page-1385003.png)
^
The Fuel Injector Cleaner Kit (J-45701) shown is an essential tool and will be sent to each applicable dealer (see the note under "Applied
Engines").
^
Additional kits can be ordered from Tech Mate at 1-800-662-2001.
^
For replacement of kit parts (except the 3M cleaner can P/N 08596), contact the 3M "Fulfillment Center" at 1-800-773-1594 or contact your
local 3M sales representative.
^
Order the cleaning can P/N 08956 (Nissan P/N 999MP-AM103P) from the "Nissan Chemical Care Product Program". You can access this direct
ship program three different ways:
1.
Website: www.NissanChemicals.com
2.
Phone: 1-800-811-0502
3.
Fax: 1-904-389-8279
Fuel Injector Cleaning Precautions
Before starting the procedure, please note the following precautions:
^
During the setup and cleaning process, it is advised that a safety face shield (or suitable face and eye protection equipment) and gloves be worn when
working around the fuel system and the cleaning chemicals. The can of cleaner has 100 psi internal pressure, so proper handling must be followed to
ensure safety.
^
Before disconnecting any fuel lines or cleaning tool fittings, make sure the pressure is released. To release the pressure:
