Pathfinder LE 4WD V6-3.3L (VG33E) (1997)
Air Bag Module And Spiral Cable - Removal
CAUTION:
^
Always place air bag module with pad side facing upward.
^
Do not attempt to disassemble air bag module.
^
The special bolts are coated with bonding agent. Do not use old bolts after removal; replace with new ones.
^
Do not insert any foreign objects (screwdriver, etc.) into air bag module connector.
Air Bag Module And Spiral Cable - Removal
^
Replace air bag module if it has been dropped or sustained an impact.
^
Do not expose the air bag module to temperatures exceeding 90°C (194°F).
^
Do not allow oil, grease or water to come in contact with the air bag module.
Air Bag Module And Spiral Cable - Removal
3. Set steering wheel in the neutral position.
4. Disconnect horn connector and remove nuts.
5. Using steering wheel puller, remove steering wheel. Be careful not to over-tighten puller bolt on steering wheel.
CAUTION: Do not tap or bump the steering wheel.
6. Remove steering column cover.
7. Disconnect connectors and remove the four screws. The spiral cable can then be removed.
CAUTION:
^
Do not attempt to disassemble spiral cable.
^
Do not apply lubricant to the spiral cable.