Pathfinder LE 4WD V6-3.3L (VG33E) (1997)
^
Do not use rags, use nylon cloths or paper towels.
^
When disassembling and reassembling, do not let foreign matter enter or contact the parts.
DISASSEMBLY
1. Remove snap ring, then draw drive shaft out.
CAUTION: Be careful not to drop drive shaft.
2. Remove oil seal.
CAUTION: Be careful not to damage front housing.
3. Remove connector and flow control valve with spring.
CAUTION: Be careful not to drop flow control valve.
INSPECTION
^
If pulley is cracked or deformed, replace it.
^
If an oil leak is found around pulley shaft oil seal, replace the seal.
^
If serration on pulley or pulley shaft is deformed or worn, replace it.