nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

ABOUT US
Drive/Propeller Shafts, Bearings and Joints > < Drivetrain - Transfer Case Noise/Hard Shifting|Page 9748

Pathfinder LE 4WD V6-3.3L (VG33E) (1997)

Page 4
background image

2. Pack drive flange groove with grease, apply grease to O-ring (two places) and mating surface of drive flange, and install flange.
3. Install snap ring.

4. Install hub cap using a suitable tool.

NOTE:  Do not reuse hub cap. When installing, replace it with a new one.

Drive/Propeller Shafts, Bearings and Joints > < Drivetrain - Transfer Case Noise/Hard Shifting|Page 9748