nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

MIL ON - DTC P0138/P0139/P0140 or P0158/P0159/P0160|Page 5363 > < Engine Controls - Seized O2 Sensor Removal Procedure|Page 5358
Page 1
background image

Oxygen Sensor: All Technical Service Bulletins
MIL ON - DTC P0138/P0139/P0140 or P0158/P0159/P0160

Classification:
EC01-036

Reference:
NTB02-006

Date:
January 15, 2002

2001 PATHFINDER; MIL "ON" WITH REAR OXYGEN SENSOR DTC P0138-P0140 OR P0158-P0160 STORED

APPLIED VEHICLE:
2001 Pathfinder (R50)

SERVICE INFORMATION

If an applied vehicle has a MIL "ON" with one of the following DTCs stored:

^

P0138

^

P0139

^

P0140

^

P0158

^

P0159

^

P0160

The cause may be a broken or cracked rear oxygen sensor element.

SERVICE PROCEDURE

1.

Use CONSULT-II SELF DIAGNOSIS to determine the stored DTCs.

2.

Replace the oxygen sensor at the incident cylinder bank(s) indicated by the stored DTC listed in CONSULT-II. Refer to the Parts Information
section to determine the correct oxygen sensor to be installed.

3.

Use CONSULT-II to determine the ECM P/N (in the vehicle).

A.

If the ECM P/N is one of those listed under "CURRENT ECM P/N" in the table shown, reprogram the ECM to the "NEW ECM P/N" listed
in the table.

B.

If the ECM P/N is NOT one of those listed under "CURRENT ECM P/N" in the table, do not reprogram the ECM. Return the vehicle to the
customer after replacing the oxygen sensors.

MIL ON - DTC P0138/P0139/P0140 or P0158/P0159/P0160|Page 5363 > < Engine Controls - Seized O2 Sensor Removal Procedure|Page 5358