Pathfinder SE 2WD V6-3.5L (VQ35) (2001)
6.
From the "CONSULT UTILITIES" screen, select "ECM DATA" (see Figure 8).
7.
The "ECM DATA REPROGRAMMING" screen will be displayed (see Figure 9):
A.
Select model and model year for the applied vehicle.
B.
Select the applicable vehicle configuration for your vehicle from that listed in the upper right ECM data description window.
^
If there is only one listing, go to step C.
^
If multiple selections are listed (M/T vs A/T, Fed vs Cal, etc.), select the applicable vehicle configuration then go to step C.
C.
Click the "CONTINUE" button on the ECM Data Reprogramming screen to proceed to CONSULT-II setup.
8.
Turn on CONSULT-II as follows to access the file transfer mode: