Pathfinder SE 4WD V6-3.5L (VQ35) (2002)
-
Check all internal parts for wear, rust and damage. Replace if necessary.
-
Pay attention so as not to scratch cylinder when installing pistons.
Inspection
DRUM
Maximum inner diameter: 296.5 mm (11.67 inch)
Out-of-roundness: 0.03 mm (0.0012 inch) or less
-
Contact surface should be fine finished with No. 120 to 150 emery paper.
-
Using a drum lathe, lathe brake drum if it shows scoring, partial wear or stepped wear.
-
After brake drum has been completely reconditioned or replaced, check drum and shoes for proper contact pattern.
LINING
Measuring Brake Lining
Check lining thickness.
Standard lining thickness: 6.1 mm (0.240 inch)
Lining wear limit (A): 1.5 mm (0.059 inch)
Installation
Always perform shoe clearance adjustment.