Pathfinder SE 4WD V6-3.5L (VQ35) (2002)
/Page-557002.png)
10. Remove the 3 water pump fixing bolts. Secure a gap between water pump gear and timing chain, by turning crankshaft pulley 20° backwards.
11. Put M8 bolts to two water pump fixing bolt holes.
12. Tighten M8 bolts by turning half turn alternately until they reach timing chain rear case.
^
In order to prevent damages to water pump or timing chain rear case, do not tighten one bolt continuously. Always turn each bolt half turn each
time.
13. Lift up water pump and remove it.
^
When lifting up water pump, do not allow water pump gear to hit timing chain.
INSPECTION
1. Check for badly rusted or corroded body assembly.
