nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Vanity Lamp|Testing and Inspection > < Diagram Information and Instructions|Page 10590
Page 2
background image

-

through case grounds of interior lamp

-

to interior lamp.

And power is supplied:

-

to interior lamp terminal 1

-

from smart entrance control unit terminal 50.

When spot lamp (LH and/or RH) is ON, ground is supplied:

-

through body grounds M4, M66 and M147

-

to spot lamp terminal 2.

And power is supplied:

-

to spot lamp terminal 1

-

from smart entrance control unit terminal 50.

When vanity mirror illumination (LH and/or RH) is ON, ground is supplied:

-

through body grounds M4, M66 and M147

-

to vanity mirror illuminations (LH and RH) terminals 2.

And power is supplied:

-

to vanity mirror illuminations (LH and RH) terminals 1

-

from smart entrance control unit terminal 50.

With power and ground supplied, interior lamps turn ON.
                                    
INTERIOR LAMP TIMER OPERATION

When interior lamp switch is in the "DOOR" position, the smart entrance control unit keeps the interior lamp illuminated for about 30 seconds when:

-

unlock signal is supplied from door lock and unlock switch while all doors are closed and key is out of ignition key cylinder

-

unlock signal is supplied from keyfob or door key cylinder while driver's door is locked and all doors are closed

-

key is removed from ignition key cylinder while all doors are closed

-

driver's door is opened and then closed while key is out of the ignition key cylinder. (However, if the driver's door is closed with the key inserted
in the ignition key cylinder after the driver's door is opened with the key removed, the timer is operated.)

The timer is canceled when:

-

driver's door is locked,

-

driver's door is opened, or

-

ignition switch is turned ON. 

                                                                   
When driver's door is locked, interior room lamp timer is canceled as described before.

ON-OFF CONTROL

When the driver side door, front passenger door, rear LH or RH door is opened, the interior room lamp turns on while the interior room lamp switch is in
the "DOOR" position.

INTERIOR LAMP BATTERY SAVER

The lamp turns off automatically when interior lamp, luggage room lamp, spot lamp and/or vanity mirror illumination is illuminated with the ignition key
is in OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in ON position for more than 30 minutes.

After lamps turn OFF by the battery saver system, the lamps illuminate again when:

-

driver's door is locked or unlocked,

-

door is opened or closed,

-

key is removed from ignition key cylinder or inserted in ignition key cylinder

Vanity Lamp|Testing and Inspection > < Diagram Information and Instructions|Page 10590