nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Engine Controls - ECM Programming Interruption Recovery|Page 7147 > < Engine Controls - ECM Programming Interruption Recovery|Page 7145
Page 1
background image

Technical Service Bulletin # 03-011

Date: 030205

Engine Controls - MIL ON/O2 Sensor DTC's Set

Classification:
EC03-001

Reference:
NTB03-011

Date:
February 5, 2003

2002 PATHFINDER; MIL "ON" WITH REAR 02 SENSOR DTC P0138/P0139/P0158/P0159/P1147/P1167

APPLIED VEHICLES: 
2002 Pathfinder (R50)

IF YOU CONFIRM:

An applied 2002 Pathfinder has the MIL "ON" and any of the following DTC's are stored in the ECM:

^

P0138 (Bank 1) H02S2 (Rear) (High Voltage Monitoring)

^

P0139 (Bank 1) H02S2 (Rear) (Response Monitoring)

^

P1147 (Bank 1) H02S2 (Rear) (Max Voltage Monitoring)

^

P0158 (Bank 2) H02S2 (Rear) (High Voltage Monitoring)

^

P0159 (Bank 2) H02S2 (Rear) (Response Monitoring)

^

P1167 (Bank 2) H02S2 (Rear) (Max Voltage Monitoring)

DETERMINE IF:

^

This bulletin applies by checking the ECM Part Number. You will do this by performing steps 1-3 in the Service Procedure.

ACTIONS:

If this bulletin applies,

^

Perform ECM Reprogramming. This is required if the ECM Part Number (P/N) in the vehicle matches one of those listed under "Current ECM P/N"
in Chart A in service procedure.

^

Replace the Rear Oxygen Sensor(s). This is required if ECM Reprogramming is needed.

IMPORTANT: 

The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service
Procedure as it contains information that is essential to successfully completing this repair.

PARTS INFORMATION

CLAIMS INFORMATION

Engine Controls - ECM Programming Interruption Recovery|Page 7147 > < Engine Controls - ECM Programming Interruption Recovery|Page 7145