Pathfinder SE 4WD V6-3.5L (VQ35) (2002)
/Page-1674005.png)
12. Install pinion assembly to rear housing.
Be careful not to damage pinion oil seal.
13. Apply a coat of multi-purpose grease to new rear oil seal lip before installing rear housing.
14. Ensure that the rack is centered. Install rear cover cap so that its protrusion is positioned as shown in figure.
Be careful not to damage worm ring and oil seal.
15. Install retainer, spring and adjusting screw temporarily.
16. Install new lock plate.
^
Attach lock plate 2 to side rod inner socket 1.
^
Apply locking sealant to inner socket threads 3.
^
Screw inner socket into rack 4 and tighten to specified torque.
^
Clinch two places of lock plate at rack's groove.
CAUTION: To prevent scratching the boot, remove burrs from lock plate.
