Pathfinder SE 4WD V6-3.5L (VQ35) (2002)
1.
Remove both front brake caliper assemblies.
^
Refer the Electronic Service Manual (ESM), section BR for brake caliper assembly removal.
2.
Check axial end play.
^
Specification: 0 mm (0 in.)
^
Refer to the Service Manual (ESM), section AX, for axial end play inspection and adjustment.
3.
Inspect the rotors to confirm they are serviceable (they can be reused/resurfacing is possible).
^
Refer to the ESM, section BR, for rotor inspection
^
Minimum Thickness: 26.0 mm (1.024 in.)
IMPORTANT:
If new rotors are required, "index" them to the hub (see "Rotor Indexing").
Turn the front rotors