Pathfinder XE 2WD V6-3.3L (VG33E) (1997)
Figure 2
2.
Trim any burrs from the hook body and hook collar. Install the hook collar back onto the hook body as shown in Figure 2.
NOTE:
Do not push the collar on any further than is shown in Figure 2. Also keep the alignment lines straight as shown in Figure 2.
Figure 3
3.
Insert the cargo net elastic cord loop fully into the replacement hook body as shown in Figure 3.
4.
Using a pair of pliers or other suitable tool, push the hook collar onto the hook body, seating it.
NOTE:
Make sure the alignment lines are still straight. This will engage the hook body locks into the hook collar.
PARTS INFORMATION
CLAIMS INFORMATION
Submit a Primary Failed Part (PP) line using the claims coding as shown.