Pathfinder XE 2WD V6-3.3L (VG33E) (1997)
2.
Remove the roof console by carefully pulling it down until the four metal clips, on the backside of the console, are released (see figure 2a).
3.
Disconnect the following connectors from the roof console (see figure 2b):
^
Map light connector
^
Temperature meter assembly connector
^
Sunroof switch connector (if applicable)
CAUTION:
To avoid damage to connectors, see the harness connector description information in the first part of the EL section of the appropriate Service
Manual.
4.
Once the connectors are disconnected, remove the temperature meter assembly from the roof console (2 screws, see figure 3).
5.
Install the new temperature meter assembly. Reinstall the two screws removed in step 4. Confirm the date code is 280801 or after (see figure 3).
NOTE:
^
The part number for the improved temperature meter assembly has not changed (see Parts Information).
^
The countermeasure date code is 280801