nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Camshaft Position Sensor > < Engine Controls - Hard Start At High Altitude/Cold Temps|Page 4987
Page 5
background image

 
5.

Recheck the base idle as outlined in steps 1 through 11.

 
NOTE:  

It is not necessary to recheck the ignition timing in step 6.

6.

Use CONSULT to clear any DTCs.  Road test the vehicle to ensure no other driveability problems are present.

Camshaft Position Sensor > < Engine Controls - Hard Start At High Altitude/Cold Temps|Page 4987