Pathfinder XE 2WD V6-3.3L (VG33E) (1997)
Ignition Cable: Testing and Inspection
COMPONENT INSPECTION
Ignition wires
1. Inspect wires for cracks, damage, burned terminals and for improper fit.
2. Measure the resistance of wires to their distributor cap terminal. Move each wire while testing to check for intermittent breaks.
Resistance:
Cylinder No. / Resistance k Ohm [at 25°C (77°F)]
1 / Approximately 6.5
2 / Approximately 10.0
3 / Approximately 8.5
4 / Approximately 12.5
5 / Approximately 8.5
6 / Approximately 11.0
If the resistance exceeds the above specification, inspect ignition wire to distributor cap connection. Clean connection or replace the ignition wire
with a new one.