PL720 2WD L4-2187cc 2.2L SOHC (Z22) (1982)
8.
With a 27mm deep socket and an appropriate capacity torque wrench on the companion flange lock nut and using the Kent-Moore Special Tool
J25774 for securing the companion flange, torque the main gear shaft lock nut to 118 to 137 n-m (12 to 14 Kg-m, 87-101 ft.-lbs.).
9.
Paint the companion flange white to indicate that the work has been done and need not be repeated should the vehicle again enter the shop.
10.
To reassemble, reverse the above procedure using the propeller shaft match marks to reconnect the propeller shaft to the transfer case flange.
Transfer (Model: T100L) -TRANSFER with main gear shaft lock nut
WARRANTY INFORMATION
CS
PNC
CT
Operation Number
Flat Rate
99
P2004
99
P20040
1.2 Hr