PL720 4WD L4-2389cc 2.4L SOHC (Z24) (1983)
Regular Cab
118-122 (4.65-4.80)
44-48 (1.73-1.89)
King Cab
113-117 (4.45-4.61)
39-43 (1.54-1.69)
g.
If necessary, turn the adjusting anchor arm bolt to obtain proper H-dimension (See Figure 4).
CAUTION:
Do not use an impact wrench on the adjusting anchor arm bolt.
h.
Repeat Steps C through H for the opposite front wheel.
i.
Exercise the front suspension as described in Step 1.
j.
Recheck H-dimension to ensure it is within factory specifications.
3)
Refer to the MA section of the Service Manual and check caster, camber and toe-in. Adjust each setting as required with toe-in adjustment as the
last operation.
WARRANTY INFORMATION
CS
PNC
CT
0P CODE
FLAT RATE
2V
48510
34
WK12HA
0.8/hr.
(Alignment)
WK99AA
0.3/hr.
(H-dimension)
1.1/hr.
(TOTAL)
Technical Service Bulletin # 88-152
Date: 981121
Tires - Vibration, Diagnosis & Out of Round Measurement
Classification:
WT88-003
Reference:
TS88-152
Date:
November 21, 1988
TIRE DIAGNOSTIC PROCEDURES
APPLIED VEHICLE(S):
All Models