PL720 4WD L4-2389cc 2.4L SOHC (Z24) (1983)
Shift Boot: All Technical Service Bulletins
M/T Shift Boot - Loose
Reference:
Date:
TECHNICAL BULLETIN TS87-122
September 7, 1987
Classification:
Section: Models:
MT87-006
Manual Transmission
1980-1986 720 Trucks
TRANSMISSION SHIFT BOOT
APPLIED MODEL: 1980-1986 720 Trucks with 71B Manual Transmission
FIGURE 1
SERVICE INFORMATION
The shift boot on some 720 trucks with the 71B manual transmission may become loose due to oil and/or ozone contamination. When this condition
occurs, dust and water may enter the transmission through the striking rod guide (see Figure 1).
FIGURE 2
To correct this condition, tighten the shift boot with two plastic tie wraps (see Figure 2). If the shift boot is cracked or damaged, replace it with a new
boot, and tighten it with two plastic tie wraps.
PARTS INFORMATION
NEW
PART DESCRIPTION
PART NUMBER
PART NUMBER
Plastic tie wrap (2.5 mm x 90 mm)
24216-V5000
-
Plastic tie wrap (2.5 mm x 200 mm)
24216-33G00
-
Shift boot -
^
Vehicles produced from 11/82 - ^ 32862-E9801 32862-E9800
^
Vehicles produced from 6/79 - 10/82 ^ Use same boot as original P/N 32862-E9300
WARRANTY INFORMATION