nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Door Switch > < Diagram Information and Instructions|Page 4519
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

    All Supplemental Restraint System (SRS) harnesses and connectors are covered with yellow outer insulation. Do not use electrical equipment
on these circuits, as accidental deployment or personal injury may result.

1.

Turn ignition switch to the OFF position, then disconnect battery ground cable.

2.

Wait at least 10 minutes for airbag system to discharge. The system will retain power for approximately 10 minutes after disconnecting
the battery ground cable. It is possible for the airbag to deploy during this time.

3.

After vehicle service is completed, ensure that entire SRS operates properly using Consult tool or self-diagnosis procedure.

Door Switch > < Diagram Information and Instructions|Page 4519