Pulsar L4-1809cc 1.8L DOHC (CA18DE) (1988)
c.
Place reverse synchronizer assembly on 5th input gear.
^
Mesh recesses of 5th input gear with projections of reverse synchronizer cone.
d.
Hook insert springs on reverse baulk ring.
NOTE:
be sure insert springs are positioned between 5th gear baulk ring teeth sets.
e.
Install coupling sleeve onto 5th input gear/reverse assembly.
f.
Install synchronizer hub onto 5th input gear/reverse assembly.
g.
Press on 5th synchronizer assembly with 5th input gear.
NOTE:
be sure notches are fully aligned before pressing.
Reverse Lever Assembly