Quest V6-3.5L (VQ35DE) (2009)
Rear Bumper: Service and Repair
REAR BUMPER
Removal and Installation
REMOVAL
1. Remove rear combination lamps RH/LH. Refer to See: Lighting and Horns/Tail Lamp/Tail Light Bulb/Service and Repair See: Lighting and
Horns/Tail Lamp/Service and Repair.
2. Disconnect sonar sensor connectors, if equipped.
3. Remove C205 clips from rear bumper fascia.
4. Remove side retainers RH/LH.
-
Rotate clip 1/4 turn to release retainer.