Quest V6-3.5L (VQ35DE) (2009)
Cowl Moulding / Trim: Service and Repair
COWL TOP
Removal and Installation
REMOVAL
1. Remove RH/LH wiper arms. Refer to See: Wiper and Washer Systems/Service and Repair/Front Wiper And Washer System.
2. Remove cowl top cover.
a. Release fastener covers and clips.
b. Remove cowl top seal by releasing ends from tabs on cowl top cover, then releasing plastic clips.
c. Remove cowl top weatherstrip.
d. Remove windshield washer nozzles and hoses from cowl top cover. Refer to See: Wiper and Washer Systems/Windshield Washer
Hose/Diagrams
3. Remove cowl top extension.
a. Remove heater pump from cowl top extension. Refer to See: Engine, Cooling and Exhaust/Cooling System/Heater Core/Service and
Repair/Heater Pump.
b. Disconnect clip attaching coolant control valve hose to cowl top extension.