Quest V6-3.5L (VQ35DE) (2009)
CAUTION:
-
Make sure snap ring is fully inserted in the snap ring groove.
-
Do not reuse snap ring.
5. Place the side flange of cylinder body with chamfering around the pin insertion hole facing up, and firmly set master cylinder assembly in a vise.
CAUTION:
-
When setting the master cylinder assembly with the vise, be sure not to over-tighten.
-
When securing with a vise, use copper plates or cloth to protect the flange.
6. Using a pin punch [commercial service tool: diameter approx. 4 mm (0.16 in)], attach the reservoir tank mounting pin so that the attachment side
and the opposite side are identical.
CAUTION:
Do not reuse reservoir tank grommets and pin.
7. If necessary, install brake fluid level switch.