Quest V6-3.5L (VQ35DE) (2009)
Oil Cooler: Service and Repair
OIL COOLER
Removal and Installation
WARNING:
Be careful not to get burned, engine coolant and engine oil may be hot.
CAUTION:
-
When removing oil cooler, prepare a shop cloth to absorb any engine oil leakage or spillage.
-
Completely wipe off any engine oil that adheres to the engine and the vehicle.
REMOVAL
1. Drain the engine oil. Refer to .
2. Drain the engine coolant. Refer to See: Cooling System/Coolant/Service and Repair.
3. Remove the wheel and tire assembly using power tool.
4. Remove the splash shield.
5. Disconnect the coolant hoses from the oil cooler.
CAUTION:
Do not spill coolant on the drive belt.