Quest V6-3.5L (VQ35DE) (2009)
CAUTION:
Press fit straight and avoid causing burrs or tilting the oil seal.
NOTE:
Make sure the garter spring is in position and seal lip is not inverted.
3. Install new O-rings on rear timing chain case.
CAUTION:
Use new O-rings for installation.
4. Apply Silicone RTV Sealant to front timing chain case as shown.
- Use Genuine Silicone RTV Sealant, or equivalent.
- Before installation, wipe off the protruding sealant.
- 2.6 - 3.6 mm (0.102 - 0.142 in) dia.
5. Apply Silicone RTV Sealant to top surface of oil pan (upper) as shown.
- Use Genuine Silicone RTV Sealant, or equivalent.