Quest V6-3.5L (VQ35DE) (2009)
/Page-335011.png)
Tool number : (J-50288)
- If the original timing chain markings are not legible, use paint or equivalent to mark the timing chains to the sprockets.
4. If removing the timing chains (secondary), loosen camshaft sprocket bolts.
5. Compress the timing chain tensioner (primary).
a. Pull lever down and release plunger stopper tab. Plunger stopper tab can be pushed up to release (coaxial structure with lever).
b. Insert stopper pin into timing chain tensioner (primary) body hole to hold lever, and keep the stopper tab released.
c. Depress the plunger into the tensioner body by pressing the slack guide.
d. Keep the slack guide pressed and lock the plunger in by pushing the stopper pin through the lever and into the chain tensioner body hole.
- Use stopper pin included with Tool J-50246.
6. Remove the internal chain guide.
- Slack guide does not need to be removed.
7. Remove timing chain (primary).
CAUTION:
