Quest V6-3.5L (VQ35DE) (2009)
2. Remove the lock ring using a socket drive handle and Tool as shown.
Tool number : KV991J0090 (J-46214)
3. Remove the fuel level sensor, fuel filter, and fuel pump assembly from the fuel tank.
CAUTION:
-
Do not bend the float arm during removal.
INSPECTION AFTER REMOVAL
Make sure the fuel level sensor, fuel filter, and fuel pump is free from defects and foreign materials.
INSTALLATION
Installation is in the reverse order of removal.
-
Install the fuel level sensor, fuel filter, and fuel pump assembly with the fuel feed hose facing the front of the vehicle.
-
Turn the lock ring until the lock ring is fully rotated into the fuel tank lock tabs as shown.
-
Connect the quick connector as follows:
-
Check the connection for damage or any foreign materials.