nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5127 > < Initial Inspection and Diagnostic Overview|Page 5125
Page 5
background image

OK or NG
OK - GO TO 4.
NG - Replace fuse block (J/B).
4.CHECK DOOR MIRROR DEFOGGER CIRCUIT

1. Turn ignition switch OFF.
2. Disconnect fuse block (J/B) and door mirror LH or RH.
3. Check continuity between fuse block (J/B) connector M3 terminal 5N and door mirror connector D13 (LH) or D113 (RH) terminal 6.

5N - 6 : Continuity should exist.

OK or NG
OK - GO TO 5.
NG - Repair or replace harness.
5.CHECK DOOR MIRROR DEFOGGER GROUND CIRCUIT

Check continuity between each door mirror connector D13 (LH) or
D113 (RH) terminal 5 and ground.

5 - Ground : Continuity should exist.

OK or NG
OK - GO TO 6.
NG - Repair or replace harness.
6.CHECK DOOR MIRROR DEFOGGER

Initial Inspection and Diagnostic Overview|Page 5127 > < Initial Inspection and Diagnostic Overview|Page 5125