Quest V6-3.5L (VQ35DE) (2009)
Windshield Washer Pump: Service and Repair
FRONT WIPER AND WASHER SYSTEM
Washer Motor
REMOVAL
1. Remove fender protector. Refer to See: Body and Frame/Fender/Front Fender/Front Fender Liner/Service and Repair.
2. Remove front and rear washer motor electrical connector and front and rear washer hoses.
3. Pull out front and rear washer motor in the direction of the arrow as shown, and remove the front and rear washer motor from the washer fluid
reservoir.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
When installing front and rear washer motor, there should be no packing twists, etc.