Quest V6-3.5L (VQ35DE) (2009)
Wiper Motor: Service and Repair
Rear Wiper And Washer System
Rear Wiper Motor
REAR WIPER AND WASHER SYSTEM
Rear Wiper Motor
REMOVAL AND INSTALLATION
Removal
1. Remove rear wiper arm. Refer to See: Wiper Arm/Service and Repair.
2. Remove pivot cap.
3. Remove back door lower finisher. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
4. Disconnect rear wiper motor electrical connector.
5. Remove rear wiper motor bolts, and remove rear wiper motor.
Installation
CAUTION:
-
Do not drop the wiper motor or cause it to contact other parts.