nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

A/C - Refrigerant Charging Equipment Maintenance|Page 7708 > < A/C - Refrigerant Charging Equipment Maintenance|Page 7706
Page 15
background image

Comments regarding leak detector use:

^

Existing R-12 leak detectors currently will not detect R-134a.

^

Many R-134a leak detectors will detect R-12; check with the equipment manufacturer.

^

Always refer to and follow the equipment manufacturers recommendations when operating leak detectors.

Comments regarding weight scale use:

^

If the scale allows electronic control of the flow of refrigerant through the scale, (i.e. internal solenoid valves) be certain that the hose fitting size is
1/2"-16 ACME, and that no refrigerant other than R-134a (along with only specified lubricant) have been used with the scale.

Charging Cylinder

^

The use of a charging cylinder is not recommended because:

^

The refrigerant may be vented into the air from the top valve of cylinder when filling the cylinder with refrigerant.

^

The accuracy of a charging cylinder is generally less than that of an electronic scale or of quality recycle/recharge equipment.

Service Procedures

^

The service procedures for R-134a A/C systems are basically the same as for R-12 A/C systems, however, the following should always be kept in
mind:

A/C - Refrigerant Charging Equipment Maintenance|Page 7708 > < A/C - Refrigerant Charging Equipment Maintenance|Page 7706