Quest Minivan GXE V6-2960cc 3.0L SOHC MFI (VG30E) (1997)
Diode: Testing and Inspection
Warning Lamps
Diode Check
^ Check continuity using an ohmmeter.
^ Diode is functioning properly if test results are as shown in the figure.
NOTE: Specifications may vary depending on the type of tester. Before performing this inspection, be sure to refer to the instruction manual for your
tester.
^ Diodes for warning lamps are built into the combination meter printed circuit.
Diode Check
Diodes for warning lamps are built into the combination meter printed circuit.