nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 4076 > < Diagram Information and Instructions|Page 4074
Page 9
background image

On some occasions an electrical incident may occur only when the car is started cold. Or it may occur when the car is restarted hot shortly after being
turned off. In these cases you may have to keep the car overnight to make a proper diagnosis.

Electrical Load

The incident may be electrical load sensitive. Perform diagnosis with all accessories (including A/C, rear window defogger, radio, fog lamps) turned on.

Introduction

Sometimes the symptom is not present when the vehicle is brought in for service. If possible, re-create the conditions present at the time of the incident.
Doing so may help avoid a No Trouble Found Diagnosis. The following section illustrates ways to simulate the conditions/environment under which the
owner experiences an electrical incident.

The tests are broken into the six following topics;

^

Vehicle vibration

^

Heat sensitive

^

Freezing

^

Water intrusion

^

Electrical load

^

Cold or hot start up

Get a thorough description of the incident from the customer. It is important for simulating the conditions of the problem.

Vehicle Vibration

Diagram Information and Instructions|Page 4076 > < Diagram Information and Instructions|Page 4074