nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

EVAP Vent Control Valve - DTC'S Stored in Memory|Page 4698 > < Fuel Check Valve <--> [Evaporative Check Valve]|Diagrams|Page 4692
Page 1
background image

Canister Vent Valve: Technical Service Bulletins
EVAP Vent Control Valve - DTC'S Stored in Memory

Classification:
EC00-015

Reference:
NTB00-060

Date:
July 17, 2000

EVAP VENT CONTROL VALVE DIAGNOSTICS

APPLIED VEHICLES: 
All 1996 - later Nissan vehicles

SERVICE INFORMATION

If an applied vehicle has one (or more) of the following DTCs stored in Self Diagnosis, use the Service Procedure below to check the operation of the 
EVAP vent control valve.

IMPORTANT NOTES:

^

If DTC(s) other than the ones listed are found stored in Self Diagnosis, the EVAP vent control valve is NOT the cause of the incident.

^

If the EVAP vent control valve passes the tests outlined in the following Service Procedure, the cause of the incident is NOT the EVAP vent
control valve.

SERVICE PROCEDURE

Perform the following checks (depending on the model year of the vehicle) to determine if the EVAP vent control valve needs to be replaced.

^

If the EVAP vent control valve asses all of the following checks, the cause of the incident is NOT the EVAP vent control valve. Refer to the
appropriate section of the service manual for the diagnostic procedure to resolve the incident.

^

If the EVAP vent control valve does not pass all of the following checks, perform repairs as necessary.

1996-97 Vehicles

1.

Check the operation of the EVAP vent control valve using a 12VDC battery source as follows:

EVAP Vent Control Valve - DTC'S Stored in Memory|Page 4698 > < Fuel Check Valve <--> [Evaporative Check Valve]|Diagrams|Page 4692