Quest Minivan GXE V6-2960cc 3.0L SOHC MFI (VG30E) (1997)
4. Put matching marks on inner race and drive shaft.
5. Remove snap ring "C", then remove ball cage, inner race and balls as a unit.
6. Draw out boot.
CAUTION: Cover drive shaft serrations with tape so as not to damage the boot.
Wheel Side
1. Before separating joint assembly, put matching marks on drive shaft and joint assembly.
CAUTION: The joint on the wheel side cannot be disassembled.
2. Separate joint assembly with a suitable tool.
CAUTION: Be careful not to damage threads on drive shaft.
3. Remove boot bands.
Support Bearing
1. Remove dust shield.
2. Remove snap ring.