Quest Minivan GXE V6-3.3L (VG33E) (2002)
Electronic Brake Control Module: Service and Repair
REMOVAL
1. Disconnect battery cable.
2. Drain brake fluid.
3. Remove air cleaner assembly.
4. Remove intake air duct assembly.
5. Remove mounting bracket bolts and nuts.
6. Disconnect connector, brake pipes and remove fixing nuts.
INSTALLATION
CAUTION: After installation, refill brake fluid. Then bleed air.
1. Connect brake pipes temporarily.
2. Tighten bolts and nuts.
3. Tighten brake pipes.
4. Connect connector and battery cable.