Quest Minivan GXE V6-3.3L (VG33E) (2002)
Fuel Pressure: Testing and Inspection
Fuel Pressure Check
-
When reconnecting fuel line, always use new clamps.
-
Make sure that clamp screw does not contact adjacent parts.
-
Use a torque driver to tighten clamps.
-
Use Fuel Pressure Gauge Kit J-44321 to check fuel pressure.
-
Do not perform fuel pressure check with system operating. Fuel pressure gauge may indicate false readings.
1. Release fuel pressure to zero.
2. Install the inline fuel quick disconnect fitting between the connection of the fuel feed hose (from tank) and the fuel hose (to engine).
3. Connect the fuel pressure test gauge (quick connect adapter hose) to the quick disconnect fitting.
4. Start engine and check for fuel leakage.
5. Read the indication of fuel pressure gauge.
At idling:
With vacuum hose connected
Approximately 235 kPa (2.4 kg/sq.cm, 34 psi)
With vacuum hose disconnected
Approximately 294 kPa (3.0 kg/sq.cm, 43 psi)
If results are unsatisfactory, perform Fuel Pressure Regulator Check.