Quest Minivan GXE V6-3.3L (VG33E) (2002)
Barometric Pressure Switch: Testing and Inspection
Component Inspection
MAP/BARO SWITCH SOLENOID VALVE
With CONSULT-II
1. Start engine and warm it up to normal operating temperature.
2. Perform "MAP/BARO SW/V" in "ACTIVE TEST" mode with CONSULT-II.
3. Check the following.
-
Condition: At idle under no-load
-
CONSULT-II display
-
Time for voltage to change
4. If NG, check solenoid valve.