Quest Minivan GXE V6-3.3L (VG33E) (2002)
9.
Repair the Wire Harness as needed (see Figure 5).
^
Do NOT use "crimp" type connectors to re-connect wires
^
Solder wires together ONLY
^
Insulate the wire harness with electrical (vinyl) tape or heat shrink tubing
^
Make sure the wire harness is correctly routed and secured to the Monitor
Modify Video Monitor Housing (for additional Wire Harness clearance):
10.
Use a suitable tool (Dremel(R), small file, etc.) to remove material from the Video Monitor Housing as shown in Figure 6.
Modify Rear Cover (for additional Wire Harness clearance):