Quest Minivan GXE V6-3.3L (VG33E) (2002)
3. Remove snap ring.
4. Remove drive plates, driven plates and retaining plate.
5. Set Tool on spring retainer and remove snap ring from high clutch drum while compressing return springs.
-
Set Tool directly over springs.
-
Do not expand snap ring excessively.
6. Remove spring retainer and return springs.
7. Remove piston from high clutch drum by turning it.
8. Remove D-rings from piston.
Inspection
REPAIR FOR COMPONENT PARTS
High Clutch
INSPECTION
High Clutch Snap Ring, Spring Retainer and Return Springs Check for deformation, fatigue or damage.
If necessary, replace.
When replacing spring retainer and return springs, replace them as a set.