Quest Minivan GXE V6-3.3L (VG33E) (2002)
Wiper Arm: Service and Repair
Front Wiper
FRONT WIPER ARM / Removal and Installation
REMOVAL
1. Tilt wiper arm to upright position.
2. Pull out and hold locking lever at base of wiper arm.
3. Pull wiper arm off pivot shaft.
INSTALLATION
1. Push wiper arm onto pivot shaft, paying attention to blind spline.
2. Tilt and hold wiper arm in upright position.
3. Push locking lever at base of wiper arm inward.
4. Gently tilt the wiper arm downward until contacting windshield.