Quest Minivan SE V6-3.3L (VG33E) (1999)
Brake Hose/Line: Service and Repair
With ABS
REMOVAL
CAUTION:
^
Be careful not to splash brake fluid on painted areas; it may cause paint damage. If brake fluid is splashed on painted areas, wash it away with
water immediately.
^
All hoses must be free from excessive bending, twisting and pulling.
1. Connect a vinyl tube to air bleeder valve.
2. Drain brake fluid from each air bleeder valve by depressing brake pedal.
3. Remove flare nut securing brake tube to hose, then withdraw lock spring.
4. Cover openings to prevent entrance of dirt when disconnecting hydraulic line.
INSPECTION
Check brake lines (tubes and hoses) for cracks, deterioration or other damage. Replace any damaged parts.
INSTALLATION
CAUTION:
^
Refill with new brake fluid "DOT 3".
^
Never reuse drained brake fluid.